Shop Time

Today I started welding up the frame cross member and support plate. I Klecko'd the support plate to the trailer skin, then positioned the cross member between the main frame rails.

Once everything was in place, I tack welded the cross member to the frame, and then tack welded the support plate to the cross member. That made sure everything was exactly where I wanted it. After that, it was a simple matter of grinding the tack welds off the cross member and bringing the cross member / plate into the shop for welding up solid.

My shop is currently, how you say, a mess. Interior skins are piled here, belly pan wraps are piled there, j-channel strewn about with a liberal sprinkling of interior window frame trim to add to the chaos. Add in your normal household fix-up projects, and you have a real dump. What the heck. I'm building things in there, not getting the space ready for a Better Homes and Gardens photo shoot. A clean shop is a shop that's not being used to it fullest potential.

Look at that stack of dimes. My little 110v MIG does a fine job of melting the metal. I could have welded 5 or 6 one inch welds along the seams and it would have been plenty stong enough, but I was having so much fun I decided to weld the entire seam up. I was talking to my friend Steve a while back about this little project (ByamCaravanner on AirForums), and he made a simple comment. He said something like "Metal does wierd things when you weld it". Well, Steve, you were right. The support plate developed a nice bit of warp from all the heat. Hopefully not enough to bother anything, but I'll find out when I go to mount it on the trailer. If I have to, I'll ditch my work, start over, and chaulk it up to experience. I know I can build this piece better, and better is the enemy of good enough.